Cadet Stable Belts


The stable belt's introduction to the forces was initially resisted by senior officers, however it eventually became accepted throughout the forces. As the name describes, these belts were first worn by cavalrymen who worked in the stables with the horses. The original cavalry stable belts buckled at the side to avoid chafing the soldier's stomach as he bent down during stable work and also to avoid marking or catching on the horse's harness.

Today's stable belt is a wide webbing belt, typically designed in a single solid colour or horizontally striped in two or more different colours. Every regiment and corps of the British Army has its own stable belt which is often quite colourful.

New Pattern RAF Stable Belt


In the Royal Air Force, this belt is worn with service working dress (No. 2 dress) either covering the top of the trousers or skirt and the lower part of the shirt. It can also be worn through belt loops if they have been specially designed to accommodate the belt's width.

[caption id="attachment_6017" align="alignnone" width="1024"]New RAF 2017 Stable Belt New RAF 2017 Stable Belt[/caption]


New RAF 2017 Stable Belt

Our unisex RAF stable belt features a chrome locket and nickel slide. Offering the lastest pattern.

Available in the following sizes: Standard width 6.5 cm; small (fits up to 28' waist), medium (fits up to 32' waist), large (fits up to 34' waist) and extra-large (fits up to 40' waist). Also available in following outsizes: xx-large (to fit waist up to 48'), xxx-large (to fit waist up to 54') and xxxx-large (to fit waist up to 60').

CCF Stable Belt


An essential item for those in the Combined Cadet Forces available in sizes S,M, L and XL.

[caption id="attachment_6019" align="alignnone" width="1024"]New CCF Stable Belt New 2017 CCF Stable Belt[/caption]


New 2017 CCF Stable Belt

Regulation Combined Cadet Force (CCF) stable belt supplied by our MoD-approved manufacturer. Features fully adjustable twin leather strap, nylon buckle, nickel slide.

Available in the following sizes: Standard width 6.5 cm; small (to fit up to 32' waist), medium (to fit up to 36' waist), large (to fit up to 40' waist) and XL (to fit up to 43' waist).

New Pattern Royal Navy Stable Belt


Until recently the Royal Navy rarely wore stable belts, unless working in a tri-service environment. However they are now issued as a standard piece of uniform with the new Royal Navy Uniform RNPCS replacing the old No. 4s.

[caption id="attachment_6022" align="alignnone" width="1500"]british forces stable belts New 2017 Royal Navy Stable Belt[/caption]


New 2017 Royal Navy Stable Belt

This Royal Navy stable belt is constructed by our MoD-approved manufacturer. Featuring a chrome, quick release fastening and slide. The new pattern designed is made to be worn with the latest Royal Navy No.4 AWD PCS uniforms.

Sizes: Standard width 6.5 cm; small (fits waist up to 30"), medium (fits waist up to 36"), large (to fit waist up to 40") and XL (to fit waist up to 44"). Colour: navy blue.

ACF Stable Belt


Stable belts are worn with most styles of informal dress, but not with full dress, service dress or mess dress.

[caption id="attachment_6028" align="alignnone" width="1500"]ACF Cadet Stable Belt New 2017 ACF Stable Belt[/caption]


New 2017 ACF Stable Belt

This regulation Army Cadet Force (ACF) stable belt is supplied by our MoD-approved manufacturer. Features fully adjustable twin leather strap, nylon buckle, nickel slide.

Sizes: Standard width 6.5 cm; small(to fit up to 32' waist), medium(to fit up to 36' waist), large (to fit 38') and XL (to fit up to 44' waist).

The Rifles Stable Belt


Regulation The Rifles stable belt
New 2017 Rifles Stable Belt

Now available in Regulation Rifle Green this stable belt is manufactured by our MoD-approved supplier. Offering a fully adjustable twin leather strap and buckle with a black slide.

Sizes: Standard width 7.5 cm; small (to fit up to 32" waist), medium (to fit up to 34' waist), large (to fit up to 36' waist) and extra-large (to fit up to 42' waist). Weight: 130g.

Royal Regiment of Scotland Stable Belt


Made using the highest quality Government 1A tartan and constructed by our MoD approved manufacturer.

[caption id="attachment_6032" align="alignnone" width="1500"]Royal Regiment of Scotland stable belt New 2017 Royal Regiment of Scotland Stable Belt[/caption]


New 2017 Royal Regiment of Scotland Stable Belt

British Army Royal Regiment of Scotland (SCOTS) stable belt featuring a fully adjustable leather strap and buckle.

Sizes: 6.5cm wide, available in sizes from 28' to 44'. Weighs - 140g (approx.). Colour - 1A tartan.

Royal Anglian Regiment Stable Belt


Regulation Royal Anglian Regiment stable belt
New 2017 Regulation Royal Anglian Regiment stable belt

The Royal Anglian Regiment stable belt is supplied by our MoD-approved manufacturer. This regulation belt features fully adjustable twin leather strap, a black buckle and nickel slide.

Sizes: Standard width 7.5 cm; small (fits waist up to 30'), medium (fits waist up to 36'), large (to fit waist up to 40') and XL (to fit waist up to 44').

PWRR Stable Belt


[caption id="attachment_6048" align="alignnone" width="1024"]custom stable belts NEW 2017 PWRR stable belt[/caption]


NEW 2017 PWRR stable belt

Regulation Princess of Wales Royal Regiment (PWRR) stable belt supplied by our MoD-approved manufacturer. Features fully adjustable twin leather strap, buckle and a nickel slide which is self coloured.

Sizes: Standard width 7.5 cm; small (fits waist up to 30'), medium (fits waist up to 36'), large (to fit waist up to 40') and XL (to fit waist up to 44').